EDC16 MY07½ / P1625 57
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Engine shut off.
Engine does not start.
Main Relay Circuit. Voltage drops to late
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Engine shut off.
Engine does not start.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| Time difference between control module grounding of the relay and discontinued control module power supply is more than 2 seconds. |
Checking the wiring harness
| • | Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force. |
| • | Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force. |
Diagnostic help
Diagnosis regards:
Functions in the diagnostic tool related to the fault:
| (See also description of readings/activations in diagnostic tool) |
