EDC16 MY07½ / P2452 02
Read the instructions below then start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
| P2452 02 |
Exhaust Particle Filter Pressure Sensor, Short to Ground
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)On-board diagnosis
Fault criteria:
| Voltage on control module sensor input is below 0.2 V. |
| Condition above must be fulfilled for at least 0.48 s. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
