Oil filter, change
| Oil filter, change |
| 1. |
Remove the oil filter using KM-726-A
(83 96 301 Wrench, oil filter Z18XE)
or KM-921 (1) - position a receptacle underneath.
|
|
| To fit |
Moisten the sealing ring on the new oil filter with a little engine oil and fit it onto the engine block - tightening torque 15 Nm (11 lbf ft).
Check the engine oil level, adjust as necessary.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
