Tensioning device for multi-belt, removing and fitting
Tensioning device for multi-belt, removing and fitting |
1. |
Remove the multi-belt - see
Multi-belt, removing and fitting
.
|
2. |
Remove the right front wheel.
|
3. |
Remove the right wing liner.
|
4. |
Remove the multi-belt tensioning device (1) from the generator bracket.
|
To fit |
1. |
Fit the drive belt tensioning device onto the generator bracket - tightening torque 35 Nm.
|
2. |
Fit the wing liner on the right-hand side.
|
3. |
Fit the front wheel
.
|
4. |
Fit the multi-belts - see
Multi-belt, removing and fitting
.
|