Lower mounting, radiator

/ 9-3 (9440) / 2008 / 2. Engine / 4-cyl petrol/E85 / Cooling system / Adjustment/replacement / Lower mounting, radiator

Change

1.	Even out the fracture surface.

2.	Fit the new mounting on the flange. Important Be careful not to damage the radiator end when drilling the hole.

3.	Drill a hole through the mounting and flange using a 4 mm bit.

4.	Remove the mounting from the flange. Fit the nut in the mounting.

5.	Fit the mounting to the flange with washer and bolt. Tightening torque 3.5 Nm (2.6 lbf ft)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.