Crankshaft position sensor (345)

/ 9-3 (9440) / 2008 / 2. Engine / 4-cyl petrol/E85 / Engine management system Trionic T8 / Adjustment/replacement / Crankshaft position sensor (345)

To remove

1.	Remove the upper engine cover.

2.	Remove the crankshaft position sensor.

3.	Unplug the crankshaft position sensor connector.

To fit

1.	Plug in the connector and fit the crankshaft position sensor with a new O-ring sparingly lubricated with Vaseline.

2.	Fit the upper engine cover.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.