Ignition coil with integrated power stage (320), B207

/ 9-3 (9440) / 2008 / 2. Engine / 4-cyl petrol/E85 / Engine management system Trionic T8 / Adjustment/replacement / Ignition coil with integrated power stage (320), B207

To remove

1.	Remove cover over ignition coils.

2.	Remove the ignition coil.

3.	Unplug the ignition coil connector.

To fit

1.	Attach the connector.

2.	Fit the ignition coil. Tightening torque 20 Nm (15 lbf ft)

3.	Make sure to locate the ignition coil cables so they are not pinched.

4.	Fit the cover over the ignition coils. Tightening torque 8 Nm (6 lbf ft)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.