Fuel pump relay (102), T8
|
Fuel pump relay (102), T8
|
Pin No.
|
Signal type
|
Description
|
1 (86)
|
Control
|
Relay coil control lead. Supplied B+ from ECM pin 51(A).
|
2 (85)
|
Ground
|
Relay coil grounding in grounding point G34S.
|
3 (30)
|
+30
|
Power supply to the relay contact from fuse 2 (727).
|
5 (87)
|
Output, B+
|
Relay switch's output.
|
The fuel pump relay is controlled from pin 51(A), which supplies B+ when the relay triggers. When the ignition is switched "ON", the fuel pump relay triggers for 1 second. This builds up pressure before pre-injection, which takes place when the crankshaft begins to rotate.
When the crankshaft then rotates, relay 7 is pulled until the ignition leaves the ON position or the crankshaft stops rotating.