Evaporative emission canister

/ 9-3 (9440) / 2008 / 2. Engine / 4-cyl petrol/E85 / Evaporative emission system / Adjustment/replacement / Evaporative emission canister

To remove

1.	Remove the fuel tank. See Fuel tank, To remove .

2.	Disconnect the quick-release couplings from the EVAP emission canister and the purge filter.

3.	Remove the bolt securing the EVAP emission canister to the bracket.

4.	Remove the EVAP emission canister from the tank.

To fit

1.	Fit the EVAP emission canister to the tank.

2.	Fit the bolt securing the EVAP emission canister to the bracket.

3.	Connect the quick-release couplings to the EVAP emission canister and the purge filter.

4.	Fit the fuel tank. See Fuel tank, To fit .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.