SAAB WIS ONLINE

EVAP canister, EU

EVAP canister, EU

Warning

The work involved in removing the fuel pipe requires working with the vehicle's fuel system. The following points should therefore be heeded in conjunction with these measures:

• Have a class BE fire extinguisher on hand! Be aware of the risk of sparks, i.e. in connection with electric circuits, short-circuiting, etc.

• Absolutely No Smoking!

• Ensure good ventilation! If there is approved ventilation for evacuating fuel fumes then this must be used.

• Wear protective gloves! Prolonged exposure of the hands to fuel can cause irritation to the skin.

• Wear protective goggles.


Important

Be particulary observant regardning cleanliness when working on the fuel system. Loss of function may occur due to very small particles. Prevent dirt and grime from entering the fuel system by cleaning the connections and plugging pipes and lines during disassembly. Use 82 92 948 Plugs, A/C system assembly. Keep components free from contaminants during storage.



1. Remove the fuel tank. Refer to Fuel tank, EU.

2. Undo the quick couplings on the fuel lines. Use 83 95 261 Tool, fuel line .


3. Remove the EVAP canister by undoing the catch (arrow).


4. Lift the EVAP canister up off the holder.


To fit


1. Fit the EVAP canister by pressing the canister onto the holder from above. Check that the catch (arrow) snaps into place.


2. Attach the quick couplings to the EVAP canister.


3. Fit the fuel tank. Refer to Fuel tank, EU.