SAAB WIS ONLINE

Glow plug (398), Z19DTR

Glow plug (398), Z19DTR

To remove


1. Remove the upper engine cover and insulation.

2. Detach the connector.


• Remove the connector. Take care during removal not to damage the connector.

• Blow clean around the glow plugs. Undo and remove them using a 9 mm deep socket.


To fit


1. 1. Fit the glow plugs.

• Fit the glow plug. Use a 9 mm deep socket.

Tightening torque 10 Nm (7 lbf ft)


2. Fit the connector.

3. Fit the insulation and the upper engine cover.