Checklist for replacing turbocharger and engine control module EDC16
 
  
 
 
  
   
    
     |  | Checklist for replacing turbocharger and engine control module EDC16 | 
   
  
  
   
   
    
    
    
    
    
   
   
    
   
   
   
    
     
      
       | 1. | Describe the fault symptom .................................................................................................................. 
 
 
         ..................................................................................................................
         
         ...................................................................................................................
         | 
     
    
   
   
    
   
   
    
     
      
       | 3. | Turn off A/C or ACC and let the engine idle. Coolant temperature should be over 80°C. 
 
 
          
           
            | Note |  
            | 
              Do not erase diagnostic trouble codes.
              |  
 | 
     
    
   
   
    
     
      
       | 4. | Read and note any diagnostic trouble codes: ........................................................................................................... 
 
 | 
     
    
   
   
    
     
      
       | 5. | Choose "Engine" - "EDC16" - "Read value / Activate" in Tech 2. Read and note the following values: 
 
 | 
     
    
   
   
   
    
     
     
     
     
     
    
    
     
      |  | Unit | Ignition On | Idle | Desired value | 
     
      | Engine speed | rpm |  |  | 700-1000 | 
     
      | Mass air flow | g/s |  |  | 10-25 | 
     
      | Coolant temperature | °C |  |  | 80-100 | 
     
      | Swirl throttle actuator | % |  |  | 3-90 | 
     
      | Fuel temperature | °C |  |  | 20-80 | 
     
      | Atmospheric pressure | kPa |  |  | 90-115 | 
     
      | Charge air control, PWM, pre-turbo | kPa |  |  | 95-115 | 
     
      | Camshaft rotation speed | rpm |  |  | 300-500 | 
     
      | Fuel pressure | bar |  |  | 300-1600 | 
     
      | Requested fuel pressure | bar |  |  | 300-1600 | 
     
      | Actuator EGR, position | % |  |  | 3-95 | 
     
      | Accelerator Pedal | % |  |  | 0-100 | 
     
      | Pedal position sensor 1 | V |  |  | 0.50-1.50 | 
     
      | Pedal position sensor 2 | V |  |  | 0.25-0.75 | 
     
      | Battery Voltage | V |  |  | 13-15 | 
     
      | Soot density, particle filter, exhaust system | % |  |  | 0-100 | 
     
      | Particle filter pressure sensor, exhaust system | kPa |  |  | 0-700 | 
    
   
   
   
   
    
    
   
   
    Mileage since last regeneration (Tech2: Dist. since PF regeneration) .................................
    
    
   
   
    The following information is available under “system information”
    
    
    
     
      
      
     
     
      
       | Vehicle Identification Number (VIN) |  | 
      
       | Saab spare parts number (P/N) |  | 
      
       | Hardware number |  | 
      
       | Software number |  | 
      
       | Programming Date |  |