Intake air sensor (688), Z19DTR
|
|
Intake air sensor (688), Z19DTR
|
|
1.
|
Remove the engine cover.
|
|
|
•
|
Remove the engine cover and insulation.
|
|
2.
|
Remove the sensor.
|
|
|
•
|
Unplug the sensor connector (A).
|
|
1.
|
Lubricate the sensor O-ring with acid-free Vaseline.
|
Important
|
|
Be careful not to damage the O-ring.
|
|
|
|
|
2.
|
Fit the sensor (B).
Tightening torque 9 Nm (7 lbf ft)
|
Important
|
|
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to
Connectors, handling and inspection
.
|
|
|
|
|
|
•
|
Plug in the sensor connector (A).
|
|
3.
|
Fit the insulation and the upper engine cover.
|
