SAAB WIS ONLINE

Oil sump

Oil sump

To remove


1. Remove the Power train or Power train, to remove, 4WD .

2. Remove Camshaft covers, removed engine

3. Remove Timing cover .

4. Remove the oil cooler assembly from the cylinder block. Remove the gasket.


5. Remove the oil sump. Prise carefully with a pry bar.


6. Clean the sealing surfaces from gasket residue and the like.


To fit


1. Apply a 2 mm thick bead of 93 160 951 Flange sealant on the oil sump sealing surface and fit a new seal on the oil strainer induction pipe.


2. Fit the oil sump.

Tightening torque, M6 bolts: 10 Nm (7 lbf ft)

Tightening torque, M8 bolts, 25 Nm (18 lbf ft).


3. Position a new gasket and fit the oil cooler to the cylinder block.

Tightening torque 25 Nm (18 lbf ft)


4. Fit Timing cover .

5. Fit Camshaft covers, removed engine .

6. Fit Power train or Power train, to fit, 4WD .