Solenoid valve seal, intake camshaft, rear cylinder bank (695R)

/ 9-3 (9440) / 2008 / 2. Engine / V6 petrol / Engine management system Motronic E9 / Adjustment/replacement / Solenoid valve seal, intake camshaft, rear cylinder bank (695R)

To remove

1.	Remove the solenoid valve .

2.	Remove the seal with a screwdriver.

To fit

1.	Clean the sealing surfaces.

2.	Lightly coat the new seal with acid-free vaseline .

3.	Fit the seal using special tool 32 025 066 (EN-46103).

4.	Fit the solenoid valve .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.