Secondary air pipe
Secondary air pipe |
To remove |
1. |
Remove
Intake manifold, upper
.
|
2. |
Remove
Intake manifold, lower
.
|
3. |
Cover for the inlet ports.
|
4. |
Remove the secondary air valve.
|
5. |
Remove the mass air flow sensor with rubber gaiter.
|
• |
Undo the hose clips (A).
|
• |
Remove the quick coupling (B).
|
• |
Unplug the connector from the mass air flow sensor (C).
|
• |
Detach the hose (D).
|
6. |
Remove bolt (A) and detach the crankcase ventilation hose (B) from the turbocharger. Fold the hose to the side.
|
7. |
Remove the bolts from pipe's brackets (C).
|
8. |
Remove the pipe's front bolts (D).
|
9. |
Remove the bolts (E) to the turbocharger actuator.
|
10. |
Pull the actuator to the side slightly and lift out the pipe.
|
To fit |
1. |
Pull the actuator to the side slightly and lift the pipe into its place.
|
2. |
Fit the bolts (E) to the turbocharger actuator.
|
3. |
Replace the gasket and fit the pipe's front bolts (D).
|
4. |
Fit the bolts (C) to the pipe's brackets.
|
5. |
Fit the crankcase ventilation hose (B) to the turbocharger and fit the bolt (A).
|
6. |
Fit the mass air flow sensor with rubber gaiter.
|
• |
Fit the hose (D)
|
• |
Plug in the connector (C) for the mass air flow sensor.
|
• |
Fit the quick coupling (B).
|
• |
Fit the hose clips (A).
|
7. |
Fit the secondary air valve.
|
8. |
Remove the protector from the inlet ports.
|
9. |
Fit
Intake manifold, lower.
|
10. |
Fit
Intake manifold, upper.
|