Valve, secondary air injection

/ 9-3 (9440) / 2008 / 2. Engine / V6 petrol / Exhaust emission control system / Adjustment/replacement / Valve, secondary air injection

To remove

1.	Remove Intake manifold, upper.

2.	Remove Intake manifold, lower .

3.	Cover over inlet ports.

4.	Remove the valve's bolts (A).

5.	Remove the quick coupling for the intake manifold, secondary air injection (B).

To fit

1.	Fit the valve using a new gasket.

2.	Fit the quick coupling for the intake manifold, secondary air injection (B).

3.	Fit the valve's bolts (A).

4.	Remove the protector for the inlet ports.

5.	Fit Intake manifold, lower .

6.	Fit Intake manifold, upper

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.