Air cleaner, B284

/ 9-3 (9440) / 2008 / 2. Engine / V6 petrol / Intake system / Adjustment/replacement / Air cleaner, B284

To remove

1.	Remove the bolts holding the turbocharger intake manifold to the radiator member (A).

2.	Undo the pipe from the air cleaner casing cover (A) and remove the cover (B). Important When removing the air filter housing cover, be careful not to damage the brake vacuum sensor.

3.	Remove the filter element (A).

4.	Remove the air cleaner casing lower section. Press out the intake manifold so that it becomes loose before the air cleaner casing is lifted out.

To fit

1.	Fit the air cleaner casing lower section. Take care that the intake manifold is properly in position.

2.	Fit the filter element (A).

3.	Fit the air cleaner casing cover.

•

Connect the hose to the air cleaner casing cover (B).

•

Attach the pipe to the air cleaner casing cover (A).

4.	Fit the bolts holding the intake manifold to the radiator member (A).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.