SAAB WIS ONLINE

(TA365-0508) SCL can not be added after replacement

TECHNICAL ADVICE - Quick information for your help
Bulletin Nbr: TA365-0508
Date: ........... October 2005
Market: All
SCL can not be added after replacement

VEHICLES CONCERNED

Saab 9-3 03-.

BACKGROUND

We have seen a increased number of faulty replaced CIM:s, where the root cause was the SCL, but the new SCL could not be added to the vehicle.

SYMPTOM DESCRIPTION

SCL Add failed, due to DTC B3948:00 set in CIM.

B3948:00 is a general code for steering lock and will be set together with a DTC that show what component/system failed.

Add is not possible as long as the DTC are stored in CIM.

ACTION

Replace the faulty SCL and connect it.

Erase DTC B3948:00 in CIM (without turning ignition from lock) (Tech2 Diagnose / MY / Saab 9-3 Sport (9440 ) / All /Diagnostic trouble codes (DTC)/Clear vehicles DTC:s/Exit/OK).

Do an Add of SCL