Direction indicator stalk

/ 9-3 (9440) / 2008 / 3. Electrical System / Lighting and signalling systems / Exterior lighting / Adjustment/replacement / Direction indicator stalk

To remove

1.	Find the hole on the underside of the direction indicator stalk. Insert a small screwdriver or a similar tool in the hole, and press the catch up while pulling the stalk out.

To fit

1.	Fit the stalk by pressing it into the steering wheel unit.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.