Fog light switch (88)
| Fog light switch (88) |
| Main task |
Used to activate front fog lights. BCM sends button status on the bus.
| Type |
The light switch has a button with return spring for the front fog lights. When the button is depressed, pin 3 is grounded. The button has an internal diagnostic resistor. When the button is not depressed, only the internal resistor (1.8 kΩ) is connected between the connection and ground.
| Connection |
|
Pin No.
|
Signal type
|
Description
|
| 1 | Ground | Grounded when the button is depressed |
| 3 | Front fog lights | To BCM. Grounded when the button is depressed |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
