Rear window washer nozzle, 5D

/ 9-3 (9440) / 2008 / 3. Electrical System / Wash/wipe systems / Adjustment/replacement / Rear window washer nozzle, 5D

To remove

1.	Open the tailgate.

2.	Remove the upper window cover.

3.	Remove the side covers.

4.	Remove the rubber plugs.

5.	Remove the nuts.

6.	Close the tailgate.

7.	Lift up the spoiler.

8.	Unplug the connector.

9.	Detach the hose to the washer nozzle.

10.	Remove the brake light bolts and remove the brake light from the spoiler.

11.	Remove the washer nozzle.

To fit

1.	Fit the washer nozzle.

2.	Fit the brake light to the spoiler.

3.	Attach the hose to the washer nozzle.

4.	Plug in the connector.

5.	Make sure the spoiler seals are in place.

6.	Put in place the spoiler and fit the spoiler nuts.

7.	Fit the rubber plugs.

8.	Fit the side covers first.

9.	Fit the upper cover

10.	Close the tailgate.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.