Windscreen wiper switch

/ 9-3 (9440) / 2008 / 3. Electrical System / Wash/wipe systems / Adjustment/replacement / Windscreen wiper switch

To remove

1.	Locate the hole on the underside of the indicator stalk-switch. Poke a small screwdriver or similar tool into the hole, push the locking clip upwards whilst pulling the indicator stalk-switch outwards.

To fit

1.	Fit the stalk-switch by pushing it into place on the steering column.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.