Replacement of a blade fuse in the fuse holder on the side of the battery cover
|
Replacement of a blade fuse in the fuse holder on the side of the battery cover
|
1.
|
Remove the battery cover.
|
2.
|
Disconnect the negative battery cable.
|
3.
|
Remove the cover from the fuse holder by pulling it up.
|
4.
|
Lift up the fuse holder and open the cover.
|
5.
|
Undo the nuts and remove the blade fuse.
|
1.
|
Clean the contact surfaces.
|
2.
|
Fit the blade fuse.
Tightening torque 4.5 Nm ±1 Nm (3.4 ±0.7 lbf ft)
|
4.
|
Fit the fuse holder to the battery shelf.
|
5.
|
Fit the cover.
|
6.
|
Connect the negative cable of the battery.
|
7.
|
Fit the battery cover.
|