SAAB WIS ONLINE

Wiring harness, injectors, B284

Wiring harness, injectors, B284

To remove

Note

If the car is equipped with a radio other than a genuine Saab radio, check that the customer has the radio code before commencing work.



1. Disconnect the negative battery cable.

2. Remove the Intake manifold, upper .

3. Remove the wiring harness:

Unplug the wiring harness connector (A).


Remove the holder (B) from the wiring harness connector.

Detach the connector (A) for the injectors. Use a small screwdriver.



To fit

Note

Spray all the connectors with anti-corrosion protection, Contact Protect or similar, to prevent verdigris formation.

Clean all the grounding points and coat them with Vaseline .



1. Fit the wiring harness:

Plug in the injectors' connector (A).


Fit the holder (B) for the wiring harness connector.


Plug in the wiring harness connector (A).

2. Fit the Intake manifold, upper .

3. Connect the negative cable of the battery.

4. Set the date and time and program any radio code.

5. Cars with Anti-Pinch: Learn Anti-Pinch.