SAAB WIS ONLINE

Limited slip differential

Limited slip differential

Warning

The hydraulic pressure in the differential clutch is very high. Wait for at least 10 minutes before removing any parts from the differential clutch.


To remove


1. Remove complete unit, differential clutch and limited slip differential .

2. Cars with limited slip differential clutch: Remove the hydraulic pipes (A) fit tool DT-49132 (B). Turn the tool (C) slightly and pull the pipe out from the quick-release coupling.


3. Cars with limited slip differential clutch: Remove the clips for the wiring harness.

4. Cars with limited slip differential clutch: Remove the bolts (A) to the limited slip differential clutch.


5. Cars with limited slip differential clutch: Carefully remove the limited slip differential clutch unit.

6. Remove the bolts (A) to the limited slip differential.


7. Remove the limited slip differential.


To fit


1. Fit the limited slip differential. Tighten the bolts (A).

Tightening torque: 30 Nm (22 lbf ft)


2. Cars with limited slip differential clutch: Fit the limited slip differential clutch unit with a new seal. Tighten the bolts (A).

Tightening torque: 30 Nm (22 lbf ft)


3. Cars with limited slip differential clutch: Fit the clips for the wiring harness.

4. Cars with limited slip differential clutch: Fit the hydraulic pipes (A) to the quick-release couplings and check that the pipes are fitted firmly.


5. Fit complete unit, differential clutch and limited slip differential .

6. Fill oil in the limited slip differential in accordance with Checking/changing oil in the limited slip differential .

7. Check/adjust the fluid level in the differential clutch.