SAAB WIS ONLINE

Delivery pipe, RHD

Delivery pipe, RHD

To remove


1. Apply wing covers and remove the battery cover.


2. Undo the battery terminals.


3. Remove the battery.

4. Diesel: Undo the holder for the control module and diesel components and move it out of the way. Undo the holder to the power steering fluid reservoir.

5. Unplug the bonnet switch.

6. Undo the cable clamp under the battery tray.

7. Remove the battery tray and the battery cooling pipe.


8. Connect 88 19 096 Bleeding equipment hose to the bleed nipple on the slave cylinder and draw out the brake fluid from the clutch system.


9. Detach the hose from the slave cylinder connection.

10. Undo the delivery pipe clip and unplug the ABS control module connector.


11. Undo the ABS unit bracket. Carefully move the bracket out of the way without bending the connected pipes.

12. Undo the accumulator connection on the master cylinder and remove the pipe.



To fit


1. Fit the delivery pipe and connect the accumulator to the master cylinder.


2. Fit the pipe to the clip and connect the pipe to the slave cylinder bleed and connecting pipe.


3. Fit the ABS unit bracket and plug in the ABS control module connector.

4. Fit the battery tray.


5. Diesel: Fit the holder for the power steering fluid reservoir and the holder for the diesel components. Fit the cable clip.


6. Plug in the bonnet switch.

7. Fit the battery and connect the battery cables.

8. Fit the battery cooling channel and the protective cover.


9. Bleed the clutch as described in Bleeding the clutch hydraulic system in the car .

10. Test the clutch operation.

11. Carry out Measures after disconnecting the battery .