Damping weight, drive shaft F17
| Damping weight, drive shaft F17 |
| 1. |
Remove the damping weight (1) from the drive shaft.
|
|
| 2. |
Fit the damping weight on the drive shaft and loosely tighten the retaining bolts. Use the measurement as a guide when fitting the damping weight (l - measured from the universal joint on the wheel side). l = 310 mm
|
|
| 3. |
Tighten the retaining bolts evenly - tightening torque 10 Nm.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
