Steering swivel member

/ 9-3 (9440) / 2008 / 6. Steering assembly / Steering linkage / Adjustment/replacement / Steering swivel member

To remove

1.	Remove the wheel hub .

2.	Remove the track rod end from the steering swivel member.

3.	Remove the steering swivel member from the MacPherson strut. Hold the bolt with a wrench so that the bolt does not rotate.

To fit

1.	Fit the steering swivel member to the MacPherson strut. Hold the bolt with a wrench so that the bolt does not rotate. Tightening torque 80 Nm +135° (59 lbf ft +135°)

2.	Fit the track rod end to the steering swivel member. Tightening torque 35 Nm (26 lbf ft)

3.	Fit the wheel hub .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.