SAAB WIS ONLINE

Track rod, inner, B284, 4WD

Track rod, inner, B284, 4WD

To remove


1. Remove the front wheel.

2. Remove bellows, steering gear .

3. Bend up the lock tabs (A) and remove the track rod (B) using tool KKM-6247 Special wrench or a 32 mm crow's foot wrench.



To fit


1. Fit the locking washer (A).


2. Fit and fasten the track rod (A). Bend in the lock tab (B) toward the inner ball joint.

Tightening torque 90 Nm (66 lbf ft)


3. Fit bellows, steering gear .

4. Fit the wheel .

5. Check Wheel geometry and adjust if necessary, see Wheel alignment .