Shock absorbers and bushes, check, 4WD
|
Shock absorbers and bushes, check, 4WD
|
Check the front and rear shock absorbers.
1.
|
Take the weight off the rear suspension and lift the steering swivel member one side at a time with a jack while checking the bushes.
|
2.
|
There should be no oil on the outer shock absorber cylinder (A).
|
3.
|
Check the condition of the upper (C) and lower (B) shock absorber bush.
|
4.
|
Check the rubber bushes for cracks and other damage in the following locations.
|
|
•
|
Lower suspension arm mountings in subframe (A) and steering swivel member (B).
|
|
•
|
Toe-in link mounting (B) in steering swivel member.
|
|
•
|
Toe-in link mounting (C) in subframe.
|
|
•
|
Longitudinal link mounting (E) in body.
|
5.
|
Check ball joints for play in the following locations:
|
|
•
|
Upper suspension arm mounting (F) in steering swivel member.
|
|
•
|
Upper suspension arm mounting (G) in subframe.
|
6.
|
Check the bushes in the suspension arm's front (A) and rear (B) mountings on the front subframe for cracks and other damage.
|
7.
|
Check the ball joints (A) in the suspension arm mounting in the steering swivel member for play.
|