SAAB WIS ONLINE

Longitudinal link bush, 4WD

Longitudinal link bush, 4WD

To remove


1. Remove Longitudinal link, 4WD .

2. Use 83 90 122 Drift and 87 91 188 Support, for removing pinion shaft and press out the bush.


To fit


1. Position the bush. An imaginary line from the recesses in the centre of the bush should be aligned with the upper edge of the upper hole in the longitudinal link.


2. Use 83 90 122 Drift and 87 91 188 Support for removing pinion shaft to press in the bush. The bush should stick up 17 mm (B) above the flat side of the link arm.

3. Fit Longitudinal link, 4WD .