Bumper shell, front
Bumper shell, front |
To remove |
1. |
Remove the upper radiator member's clips (A) and bolts (B)
|
2. |
Raise the car.
|
3. |
Remove the bumper bolts (C) in the wing liner.
|
4. |
Remove the spoiler shield's bolts (A). Unplug the connector (B) and remove connector (C).
Cars with headlamp washers: Detach the washer hose. Suspend it and seal as necessary. |
5. |
Pull the corner of the bumper shell (A) loose from the holder's mountings.
|
6. |
Lift off the bumper shell.
|
To fit |
1. |
Check that the cellular block is in place in the shell.
|
2. |
Position the bumper. Press the shell back and press the shell clips into the holder (A).
|
3. |
Fit the bumper bolts (C) to the wing liner.
|
4. |
Fit the clips (A) and bolts (B) to the upper radiator member.
|
5. |
Fit the connector (C) and plug in connector (B). Fit the spoiler shield bolts (A).
Cars with headlamp washers: Fit the washer hose. |
6. |
Lower the car and check the fit of the bumper shell.
|