Front door handle

/ 9-3 (9440) / 2008 / 8. Body / Doors and locks / Adjustment/replacement / Front door handle

To remove

1.	Driver's door : Remove the bolt (A).

2.	Passenger door : Remove the cover (B).

3.	Hold the opening handle (C) in its outer position and unscrew the bolt (D) to the stop position. [Torx T25]

4.	Remove the handle by:

•

Loosen the rear part (E) of the handle.

•

Remove the front part (F) by moving it rearwards and unhooking the front edge of the handle.

To fit

1.	Fit the door handle in place.

•

Fit the front part (F) by hooking the front edge of the handle into place.

•

Fit the rear part (E) of the handle.

2.	Hold the opening handle (C) in its outer position and screw in the bolt (D) to the stop position.

3.	Driver's door : Fit the bolt (A)

4.	Passenger door : Fit the cover (B)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.