The A pillar trim moulding, CV
The A pillar trim moulding, CV |
To remove |
1. |
Retract the soft top.
|
2. |
Pull out the windscreen frame seal from the A pillar trim moulding. Start at the bottom edge.
|
3. |
Undo the screws from the A pillar seal mount. Remove the mount.
|
4. |
Pull out the trim moulding from the corner of the rubber moulding and pull away the thin rubber moulding.
|
To fit |
1. |
Fit the thin rubber moulding on the inside of the A pillar trim moulding using the removal tool. Start to fit from the lower edge.
|
2. |
Push the trim moulding into the corner of the rubber moulding.
|
3. |
Fit the trim moulding screws.
|
5. |
Check the fit of the moulding.
Cars with pinch protection : Perform Calibration of pinch protection |