Position sensor, soft top cover locked (562LH/RH)
Position sensor, soft top cover locked (562LH/RH) |
To remove |
Only the method for changing the position sensor on the right-hand side is described below. The same method applies to changing the sensor on the left-hand side.
1. |
Open the soft top cover. Raise the sixth bow and support it with
82 93 847 Soft top support
.
|
2. |
Remove the cable tie on the position sensor cable. Note the location of the cable ties.
|
3. |
Unplug the position sensor cable.
|
4. |
Remove the position sensor from the soft top cover hinge using a screwdriver.
|
5. |
Remove the position sensor from the plastic holder.
|
To fit |
1. |
Fit the position sensor to the plastic holder.
|
2. |
Fit the position sensor to the soft top cover hinge.
|
3. |
Connect the position sensor cable connector.
|
4. |
Fit the cable tie to the position sensor.
|
5. |
Remove the soft top support and raise the soft top.
|
6. |
Test the operation of the soft top.
|
7. |
Connect the diagnostics tool and erase any diagnostic trouble code.
|