SAAB WIS ONLINE

Floor console, with UHP connection

Floor console, with UHP connection

To remove


1. Remove the floor console:

• Move the front seats to their rear position.

• Remove the forward side panels (A).


• Move the front seats to their front position.

• Remove the rear cover panel (B) by pulling it out and back.


• Lift the hook (C) and remove the rear side panels by pulling them out and back.


• Move the front seats to their rear position.

• Remove the cover (D), use 82 93 474 Removal tool in the rear edge of the cover and pull back.


• Man: Remove the gear lever gaiter from the cover.

• Aut: Remove the cradle (F).


• Apply the handbrake and remove the cover (G) under the handbrake by pulling the cover straight out.


• Remove the cover on the passenger side by clamping the cover together and lifting up.

• Remove the box under the passenger side's cover (H).

• Remove Phone cradle, UHP .

• Remove the rubber mat in the floor console's storage box. Remove the floor console's screws (I).

Note

There are different screws for plastic and aluminium.



• Aut: Place the selector lever in position N .

• Unhook the air duct from the floor console's rear mounting.

• Remove the cable tie (J) from the floor console.


• Unplug the connectors (K) from the ignition switch and the 12 V socket. Remove the cable ties (L).


• Lift the console up and back.


To fit


1. Fit the floor console:

• Position the floor console.

• Plug in the connectors (K) for the ignition switch and the 12 V socket. Fit the cable ties (L).


• Fit the cable tie (J) for the floor console.


• Hook the air duct in the floor console's rear mounting.

• Fit the floor console's screws (I) and fit the rubber mat in the floor console's storage box.

Note

There are different screws for plastic and aluminium.



• Fit Phone cradle, UHP (375c) .

• Fit the box under the passenger side's cover and fit the cover (H).


• Fit the cover (G) under the handbrake.

• Aut: Fit the cradle (F) and the cover (D).



• Man: Fit the gear lever gaiter and the cover.

• Fit the rear side panels (C).


• Fit the rear cover (B).


• Fit the forward side panels (A).