Luggage compartment trim, floor panel, 4D

/ 9-3 (9440) / 2008 / 8. Body / Interior equipment / Adjustment/replacement / Luggage compartment trim, floor panel, 4D

To remove

1.	Remove the rear seat back rest .

2.	Lift off the floor panel from the centre mounting of the rear back rests.

3.	Lift out the floor panel.

To fit

1.	Position the floor panel.

2.	Make sure that the floor panel is correctly located over the centre mounting of the rear back rests.

3.	Fit the rear seat back rest .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.