Weatherstrip, boot lid

/ 9-3 (9440) / 2008 / 8. Body / Interior equipment / Adjustment/replacement / Weatherstrip, boot lid

To remove

1.	Open the boot lid and remove the weatherstrip by pulling it straight out.

2.	Shut the boot lid slightly and slide the weatherstrip off over the boot lid.

To fit

1.	Shut the boot lid slightly and slide the weatherstrip off over the boot lid.

2.	Fit the weatherstrip. Use a rubber hammer so that the weatherstrip is properly located.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.