Motor, backrest adjustment, electrically operated seat (357d), CV
|
Motor, backrest adjustment, electrically operated seat (357d), CV
|
1.
|
Position the seat in its highest position.
|
2.
|
Fold down the backrest.
|
4.
|
Remove the connector from the adjustment motor.
|
5.
|
Remove the adjustment motor by undoing the screws and pulling the adjustment motor straight off its shaft.
|
1.
|
Fit the adjustment motor. Ensure that the spacer is fitted on the back of the adjustment motor.
|
2.
|
Attach the connector to the adjustment motor.
|
4.
|
Fold back the backrest.
|
5.
|
Check using the diagnostic tool as follows:
Connect the diagnostic tool to the data link connector under the dashboard.
Delete any fault codes.
Turn off the ignition and turn it on again. Wait for at least 1 minute with the ignition on.
Check if any fault codes are displayed:
If a fault code is displayed:
Carry out fault diagnosis as instructed for each respective diagnostic trouble code.
If no fault code is displayed:
Installation is successful. Disconnect the diagnostic tool.
|
6.
|
Check the adjustment motor function.
|