ACM / B1019 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Airbag warning lamp is lit
Control Module, Not Calibrated
Fault symptom
Airbag warning lamp is lit
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| The control module configuration does not agree with the car configuration. |
System reaction to a fault:
| The airbag system should be considered non-operational. There may, however, be some functionality. |
Fault handling:
| Perform fault diagnosis for the other DTCs in the system |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
IMPORTANT
| • | Read "Before starting fault diagnosis" under Fault diagnosis, general before beginning fault diagnosis. |
Diagnostic help
Diagnosis regards:
