EDC16 / P0602 36
Read the instructions below then start the fault diagnostic procedure.
| P0602 36 |
Control module - ECU fault
On-board diagnosis
Type of diagnosis:
| Continuous |
Enable criteria:
| Ignition ON. |
Fault criteria:
| Fault in the control module memory. |
Diagnostic help
Diagnosis regards:
| See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
