SAAB WIS ONLINE

RDCM / C0393 0B

Read the instructions below then start the fault diagnostic procedure.

  C0393 0B


Limited Slip Differential Clutch Solenoid Valve Circuit, Current too High



On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Turn Ignition On

Fault criteria:

When current on output exceeds 5.7A.

System reaction to a fault:

Rear wheel drive shut down

Checking the wiring harness

Jiggle the wiring harness at several points to detect intermittent breaks or short circuits. Check also the connector for oxidation or loose pins.

Diagnostic help

Diagnosis regards:

Electrical fault in connecting leads or component.

Functions in the diagnostic tool related to the fault:

Test value:
Differential Operating Status
Activation:
Differential Clutch Pressure
Differential Solenoid Amps
Disable Differential Clutch
(See also description of readings/activations in diagnostic tool)