STC / B1010 08

Read the instructions below then start the fault diagnostic procedure.

Symptom: Possible message on the display Soft top cannot be operated

B1010 08

Fault symptom

Possible message on the display

Soft top cannot be operated

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Soft top opening/closing activated

Fault criteria:

One of the position sensors is incorrectly positioned in comparison with the other position sensors.

System reaction to a fault:

Control module switches off soft top operation

Diagnostic help

Diagnosis regards:

The soft top is operated in sequences. Each sequence must begin with the sensors in a position that matches the movement pattern.

Functions in the diagnostic tool related to the fault:

Test value:

•	1st Bow Locked

•	1st Bow Ready to Latch

•	Tonneau Cover Latched Left

•	Tonneau Cover Latched Right

•	Soft Top Stowage Up

•	Soft top cover up

•	6th Bow Up

•	6th Bow Latched Left

•	6th Bow Latched Right

•	Main Cylinder Up

•	Main Cylinder Down

Other

•	Sensor Test

(See also description of readings/activations in diagnostic tool)