SAAB WIS ONLINE

Add Keys

Add Keys

First, an information window will be displayed stating that the application requires security access from TIS 2000 and that all keys must be programmed at the same time.

After pressing Enter Key, certain checks are performed.

Task Status
Checking Preconditions OK
Checking Security Access Working
Adding Keys
Clear all DTC's


If security access is not retrieved from TIS 2000, a help window will be displayed describing the procedure to get security access .

After this check, you will be asked to turn the key to ON before Tech 2 enters the phase to add the keys. You will then be asked to turn the key to LOCK and the following window is displayed:

Adding Keys
Insert a valid key in the Ignition lock
Press OK to Continue
Press <EXIT> to Quit.
OK


When OK has been selected, the following window is displayed:

Adding Keys
1 key Successfully Programmed
Do You Wish to Program Another Key?
No Yes


If Yes is selected the following window is displayed:

Adding Keys
Remove Programmed Key
Insert next key in the Ignition lock
Press OK to Continue
Press <EXIT> to Quit.
OK


If you choose to continue you will return to the previous window, the difference being that the total number of keys has been counted.

Adding Keys
2 keys Successfully Programmed
Do You Wish to Program Another Key?
No Yes


Continue until all the keys are programmed. You will then be asked to turn the key to ON. All DTCs are cleared and you will then be asked to turn the key to LOCK, which completes key programming.