Centring tool, engine and subframe
Centring tool, engine and subframe |
Fitting, removal/fitting tool, subframe |
1. |
Fit the tool on the trolley lift as illustrated. Pay attention to the positioning of the column and the locating pins.
|
2. |
Position the tool under the car's subframe as illustrated.
|
Fitting centring tool, subframe - engine |
1. |
Petrol B207 and B284:
Install
83 96 152 Kit, centring tool engine
on
83 96 145 Centring tool, subframe - engine
with
83 96 368 Supplement kit for centring fixture
. Pay attention to bolt location. The distance from the washer to the slot in the threads is different on the two short sleeves. Fit only sleeve
A
as illustrated. Use
Thread locking adhesive, Loctite 270
on the sleeve.
B284: Use 32 025 059 Support . Petrol 1.8 XE: Use 83 96 145 Centring tool, subframe - engine with support from 83 96 368 Supplement kit for centring fixture . Diesel: Fit 32 025 007 Installation fixture on 83 96 145 Centring tool, subframe - engine with support from 83 96 368 Supplement kit for centring fixture . CV: In order to fit 83 96 145 Centring tool, subframe - engine to the subframe, a recess must be made in one of the fixture "legs" as illustrated below. |
Adjusting (after subframe is fitted to body) |
2. |
Tighten the bolts to the prescribed torque.
|