Fan motor, removing and fitting

/ 9-3 (9440) / 2009 / 2. Engine / 1.8 XE petrol / Cooling system / Adjustment/replacement / Fan motor, removing and fitting

1.	Remove the fan cowling ( Fan cowling, removing and fitting ).

2.	Remove the fan motor.

-

3 x unscrew the bolt (A).

3.	Fit the fan motor. Check that the lock clip (A) is fitted correctly.

-

3 x tighten bolt Tightening torque 5 Nm (3.7 lbf ft)

4.	Fit the fan cowling ( Fan cowling, removing and fitting ).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.