Brief description
| Brief description |
| Description |
General
The exhaust system is designed to discharge the engine exhaust gases with a low flow resistance, low noise level and long life.
The exhaust system comprises three parts: a front section, and two rear sections with two silencers. Both of the silencers are a combination of resonance and absorption silencer. The catalytic converter is built together with the exhaust pipe.
The exhaust system is rubber-mounted at six points.
Corrosion protection
The exhaust system is corrosion free with all constituent materials, except the outer plate of the front silencer, being made of chrome steel. The outer plate of the front silencer is aluminised. Together, this gives a good resistance to corrosion.
Heat shields
Heat shields are mounted above the hottest zones of the exhaust system to protect exposed sites where heat radiation could otherwise cause a problem.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
