Oil change, Z19DTR

/ 9-3 (9440) / 2009 / 2. Engine / 4-cylinder diesel / Basic engine / Adjustment/replacement / Oil change, Z19DTR

To remove

1.	Raise the car and remove the lower engine cover.

2.	Place a receptacle under the car.

3.	Remove the oil sump drain plug.

4.	Drain the oil.

5.	Remove the receptacle.

To fit

1.	Change the seal and fit the oil plug. Tightening torque 25 Nm (18 lbf ft)

2.	Fit the lower engine cover.

3.	Lower the car.

4.	Fill with oil to specification. See Lubricating system . Check the level when the engine is warm, 2-5 minutes after it is switched off.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.