Glow plug (398), Z19DTR
Glow plug (398), Z19DTR |
To remove |
1. |
Remove the upper engine cover and insulation.
|
2. |
Detach the connector.
|
• |
Remove the connector. Take care during removal not to damage the connector.
|
• |
Blow clean around the glow plugs. Undo and remove them using a 9 mm deep socket.
|
To fit |
1. |
1. Fit the glow plugs.
|
• |
Fit the glow plug. Use a 9 mm deep socket.
Tightening torque 10 Nm (7 lbf ft) |
2. |
Fit the connector.
|
3. |
Fit the insulation and the upper engine cover.
|